![]() Although they are the good kind with the ball on the end. If you did the same I would not use the included Allen wrench. I put Loctite on the grub screws for the couplers and I had a heck of a time removing the first one. It took me about 3 hours to disassemble and rebuild. My thoughts were since the Y-axis was increasing the most I would install the longer length of drag chain on it. I didn’t know which went on the X and which went on the Y-axis. Included are 2 different lengths of drag chain to extend the existing ones. I used deduction to answer the second question myself. I yoloed it and referenced the manual when I had a question. The original kit came with some decent length wires, new ones are not necessary. 4x Hexagonal Wrench, 4mm, 3mm, 2.5mm, 1 mm.2x X-axis Aluminum Extrusion (lead screw included).2x Y-axis Aluminum Extrusion (lead screw included).When I inquired about the kit I didn’t realize how boring a review of the kit would be but I will do my best to bring some additional value beyond just unboxing and building experience. ![]() That is what we are here to check out today. It increases the stock size from 300 x 400 to 600 x 600. SainSmart recently released an extension kit that I have now had for a few weeks. I teased this article in the final review of the Genmitsu PROVerXL 4030 CNC Router.
0 Comments
Leave a Reply. |